Oligo Modifications
Support and Educational Content

Understanding melting temperature (Tm)

Considerations for better oligonucleotide design

Hybridization is a common step of many, if not most, molecular biology protocols. Examples of techniques that include nucleic acid hybridization are northern and Southern analysis, PCR/qPCR, cloning, in situ hybridization, array analysis, gene knockdown, and next generation sequencing (NGS).

The criteria for hybridization are based on nucleic acid strand melting. Therefore, an understanding of melting temperature (Tm) provides information on when and how the DNA or RNA strands are going to hybridize and defines the rules for hybridization. It is very important to understand this process so that you can better design and optimize the oligos for your experiments.

IDT resident thermodynamics expert explains

Dr Richard Owczarzy (Ohv-char’-zee), a senior researcher at IDT and an extensively published expert on nucleic acid thermodynamics, confirms that many researchers are still under the illusion that they can use a simple formula to calculate Tm—multiplying the number of GC and AT bases by a given constant. “But this is not how Tm works,” says Dr Owczarzy. “Tm is not a constant value, but is dependent on the conditions of the experiment. Additional factors must be considered, such as oligo concentration and the environment in which hybridization will take place.” Important factors that affect Tm include:

Oligonucleotide concentration

Tm varies with oligonucleotide concentration. While folding of a single oligonucleotide is concentration independent, the Tm is strongly influenced by oligo concentration when 2 or more nucleic acid strands interact. Oligo concentration alone can cause Tm to vary by ±10°C. The strand that is in excess determines Tm. For example, in PCR/qPCR, the target concentration is usually designed to be much lower than that of the probe. In such situations, Tm is determined by the probe because it is in excess.

Salt environment

The concentrations of monovalent (sodium, potassium), divalent (magnesium), and polyvalent cations affect the stability of hybridized oligonucleotides. Divalent cations have the biggest impact on Tm—changes in the millimolar range are significant. Increasing the concentration of monovalent cations, such as Na+, up to 1–2 M stabilizes oligos. However, these higher concentrations can significantly impact Tm. “A change from 20–30 mM Na+ to 1 M Na+ can cause oligonucleotide Tm to vary by as much as 20°C,” notes Dr Owczarzy. “We have worked through the calculations for sodium and magnesium ion concentrations and have come up with complicated models to predict Tm. This formula is used in the IDT SciTools® programs to ensure your calculations are correct.” (See the formula in the above sidebar, Accurate Tm Calculation, and read a detailed explanation in the Technical Report, Calculation of Tm for Oligonucleotide Duplexes, listed in the Related Reading box below). The free online SciTools programs, such as the OligoAnalyzer® tool, are available on the IDT website at www.idtdna.com/scitools.

Only free Mg2+ in solution reacts with DNA; therefore, it is also important to consider the presence of any compounds that bind mag¬nesium ions. For example, PCR reactions require deoxynucleoside triphosphates (dNTPs) in a mixture with short oligomer primers, probes, and longer nucleic acid targets. Magnesium ions bind to all of these components, thus decreasing the concentration of free Mg2+. As DNA synthesis proceeds during PCR, dNTPs are incorporated into the products and pyrophosphate is released. Pyrophosphate also binds Mg2+. Ideally, all of this should be considered when estimating the concentration of free Mg2+ in the hybridization solution.

Mismatches and single nucleotide polymorphisms (SNPs)

Mismatches between hybridizing oligos have a profound effect on Tm. The effect depends both on sequence context and solution composition (while salt is the main factor considered, other additives, like urea, DMSO, and even SYBR® Green, can shift Tm). A single mismatch can cause Tm to vary between 1 and 18°C in PCR applications. The identity of the mismatch, its position in the sequence, and its context all impact the degree of the mismatches effect. A-A and A-C are among the least stable mismatch pairs, causing the largest Tm variation, as compared to G-T, one of the more stable mismatch pairs. The context of the mismatch (e.g., whether a G-T mismatch is adjacent to an A-T or G-C base pair) also affects Tm. “It really requires a calculator to get an accurate prediction of Tm for one’s specific sequence, and there is no simple rule of thumb you can use without running the calculation,” says Dr Owczarzy.

SNPs that underlie primer and probe hybridization sites, cause mismatches. Thus, "SNPs can affect PCR/qPCR experimental outcomes. There are a lot of SNPs out there, and their numbers are growing exponentially! Thus, we must design our PCR/qPCR assays intelligently, with SNPs in mind. It is important to check NCBI's dbSNP database (www.ncbi.nlm.nih.gov/snp) to determine whether SNPs have been identified within your amplicon. Then you can attempt to design your primer and probe locations around those SNPs, as the mismatches they create could likely affect your PCR results,” warns Dr Owczarzy. "However, by positioning them towards the 5' end of the probe or primer sequences, thus, away from the 3' end, these effects can be minimized or even prevented."

Designing oligonucleotide probes for mismatch discrimination. When mismatch discrimination is the goal of an experiment, shorter probes will provide better detection. However, use of short probes, which will have a low Tm and, thus, require a low annealing temperature, can also reduce specificity. So there is a trade-off. One way around this is to add stabilizing modifications such as locked nucleic acid (LNA) residues to raise probe Tm. However, there are currently no calculators available for measuring how Tm is affected by most of the available modifications; therefore, the Tm needs to be determined empirically. If you can reach PCR annealing temperatures of 60°C, then you can use these shorter probes.

Choice of target strand. Sense and antisense strands are not equal with regard to mis¬match discrimination. PCR/qPCR produces complementary strands; therefore, you can choose the strand to which the probe will bind. Thus, if you aim to detect a single base change in one strand, you can choose to design the primers and/or probe to detect the corresponding change of the complementary base in the other strand. The probe sequence used to bind to the sense strand will form a different type of mismatch than the sequence required to bind to the antisense strand. It may, therefore, be useful to calculate Tm for both scenarios. Again, the free, online IDT OligoAnalyzer program allows researchers to calculate Tm for mismatched sequences. You can also use the program to determine probe locations that enable better mismatch discrimination.

Dr Owczarzy’s tips to improve your hybridization experiment
  • Always Calculate Tm. The Tm values provided on product spec sheets are calculated for specific conditions that are likely to be different from your reaction conditions. Use a design tool, such as the IDT OligoAnalyzer® Tool, to make accurate calculations based on your own experimental conditions.
  • Tm is affected by the concentration of ions and compounds in solution. Take these into account when calculating Tm.
  • When possible, design your primer and probe sequences around SNPs. When this is not possible, position SNP locations towards the 5' end of the primer or probe sequence where they will have less effect on amplification.
  • Certain modifications, such as LNAs, provide good mismatch discrimination.
  • You can design probes to the sense or antisense strand, but you must still evaluate their Tm, which may differ.


  1. Freier SM, Kierzek R, et al. (1986) Improved free-energy parameters for predictions of RNA duplex stability. Proc Natl Acad Sci, USA. 83(24):9373–9377.

Researcher profile

Dr Owczarzy came to IDT immediately after completing his PhD in chemistry at the University of Illinois, Chicago, IL, USA. He is currently a Senior Research Scientist and the “Thermodynamics Guru” at IDT. Dr Owczarzy’s research is focused on properties and functions of nucleic acids. His group has built complicated models and formulas that accurately predict Tm for nucleic acids. This work has helped numerous researchers worldwide to design oligonucleotides for molecular biology studies.

Currently, Dr Owczarzy is studying the characteristics of modified nucleic acids. He is also running molecular modeling experiments to test oligonucleotide interactions.

See a list of Dr Owczarzy’s publications at www.owczarzy.net/myPublications.htm.

Product focus—Online tools, Custom Oligos, ReadyMade™ Primers

Free online tools for oligonucleotide analysis and primer design

Explore IDT SciTools® Web Tools for free, online software for oligonucleotide analysis and for qPCR probe and assay design. The design engines for these tools use sophisticated formulas that, for example, take into account nearest-neighbor analysis to calculate Tm.

Custom Oligonucleotides

You can order up to 1 µmol desalted, custom synthesized DNA oligonucleotides and they will be shipped to you the next business day (larger scales are shipped within 5 business days). You can also specify whether to receive them dried down or hydrated, and whether you want them already annealed. Every IDT oligonucleotide you order is deprotected and desalted to remove small molecule impurities. Your oligos are quantified twice by UV spectrophotometry to provide an accurate measure of yield. Standard oligos are also assessed by mass spectrometry for quality you can count on.

ReadyMade Primers are stocked oligonucleotides for sample preparation, sequencing, and gene expression analysis of common genes, including 16S rRNA primers. Identity is confirmed by mass spectrometry and purity is established by capillary electrophoresis. Because these primers are prestocked, they can be shipped as soon as they are ordered and, therefore, provide a fast turnaround time.

Related reading

The importance of Tm in molecular biology applications—Learn how to predict and select the appropriate Tm for oligo hybridization steps, including PCR.

Using the OligoAnalyzer® Program—Free IDT web tool that allows you to determine the physical characteristics of your oligonucleotides.

Calculation tips for resuspending and diluting nucleic acids—Use these simple guidelines for making a 100 µM solution; calculating nanomoles, micrograms, copy number, and concentration; and determining concentration equivalencies.

Review other DECODED Online newsletter articles on oligo handling and analysis.

You can also browse our DECODED Online newsletter for additional application reviews, lab tips, and citation summaries to facilitate your research.

Author: Yong You is a Market Analyst and former research colleague of Dr Owczarzy at IDT.

© 2013, 2016 Integrated DNA Technologies. All rights reserved. Trademarks contained herein are the property of Integrated DNA Technologies, Inc. or their respective owners. For specific trademark and licensing information, see www.idtdna.com/trademarks.

IDT web tools for oligo properties

Free, online tools for oligo design, secondary structure, dilution, and resuspension.

Try them now ≫

Related Articles

DNA Oligonucleotide Resuspension and Storage

Guidelines and recommendations for how to resuspend and store newly synthesized oligonucleotides.

Read more ≫

Calculation Tips for Resuspending and Diluting Nucleic Acids

Easy guidelines for making a 100 µM solution; calculating nmoles, µg, copy number, and concentration; and determining concentration equivalencies.

Read more ≫

Understanding Melting Temperature

Advice on considerations for better oligo design: oligo concentration, salt, and SNPs.

Read more ≫

Oligonucleotide Modifications: Choosing the Right Mod for Your Needs

Guidelines on selecting specific oligonucleotide modifications and how they can help you in your research.

Read more ≫

Which Biotin Modification to Use?

Applications of each of the different biotins available from IDT.

Read more ≫