PCR and qPCR
Support and Educational Content

Epigenetic biomarkers for prostate cancer

How PrimeTime® qPCR Assays, ZEN™ Double-Quenched Probes, and gBlocks® Gene Fragments facilitate this research

The prognosis for men with aggressive prostate cancer is improved if the disease is detected at an early stage, while it is still potentially curable. Dr Antoinette Perry, a Senior Research Fellow at the Institute of Molecular Medicine of Trinity College (Dublin, Ireland), leads a team of scientists who perform functional and translational research to facilitate early detection of prostate cancer and identify biomarkers that distinguish between low- and high-risk disease. Research in Dr Perry’s lab is directed at understanding how changes in DNA methylation of coding and non-coding RNA genes are involved in driving prostate carcinogenesis. The scientists exploit specific epigenetic changes for early, noninvasive detection of aggressive prostate cancer. In the process, they hope to develop predictive epigenetic biomarkers—focusing both on circulating free nucleic acids and exosomes—that can be quantified by simple, liquid biopsy. The experimental designs used by the lab to identify epigenetic markers and their effects on gene expression are outlined in Figure 1, and discussed in the Methods definitions box.

Figure 1. Experimental approaches for studying cancer epigenetics.
Epigenetic analysis is performed on DNA isolated from formalin fixed, paraffin embedded tissue specimens and expressed prostatic secretions present in urine, and on cell-free DNA isolated from peripheral blood plasma. The effect of pharmacological demethylation on gene expression and DNA methylation is studied in in vitro cell culture models using DNA methyltransferase (DNMT) inhibitors. DNA methylation is evaluated using both high resolution melt analysis (MS HRM) and quantitative methylation-specific PCR (qMSP). Standard qPCR assays are also used to quantify gene expression. The illustrative example shows methylation and expression analysis of the SFRP2 gene involved in canonical and non-canonical Wnt signaling pathways. (Figure provided by Alexandra Tuzova.)

Methods definitions

Sodium bisulfite modification of DNA: A process to convert unmethylated cytosine (C) residues in a DNA sequence into uracil (U), usually as a means for measuring levels of DNA methylation. DNA is treated with sodium bisulfite followed by an alkali. This deaminates unmethylated C residues and converts them to uracil (U) [1,2; Figure 2]; all 5-methylcytosine (5mC) residues present in the DNA are protected and continue to be maintained as C (C=U, 5-mC=C) [3]. The modified DNA can then be amplified with PCR primers designed to anneal with bisulfite-converted (altered) sequence. U (formed from unmethylated C) and thymine (T) nucleotides are amplified as T, whereas only 5-mC residues are amplified as C (Figure 3). Since bisulfite modification to distinguish between C and 5-mC in DNA was first described [2], many methods have been developed based on this chemistry.

Figure 2.
Bisulfite conversion of DNA. In the first step, bisulfite is added to the 5-6 double bond of cytosine. The resulting cytosine sulphonate undergoes hydrolytic deamination yielding uracil sulphonate in Step 2. In the third, final step, alkali treatment removes the bisulfite adduct, leaving uracil. Although 5-mC can also react with bisulfite, the reaction is extremely slow and the equilibrium favors 5-mC rather than the deaminated product thymine. (Figure courtesy of Dr Antoinette Perry, adapted from Shapiro et al, 1973 [4] and Clark et al, 1994 [5].)

Figure 3. PCR amplification of bisulfite-treated DNA. This example shows how a DNA sequence containing both methylated cytosines (blue, at left) and unmethylated cytosines (blue, at right) will be altered upon bisulfite treatment and PCR amplification. (Figure provided by Alexandra Tuzova.)

Methylation-specific PCR (MSP):
A PCR technique that discriminates DNA methylation status without use of methylation-sensitive restriction enzymes. The DNA sample is treated with sodium bisulfite, which converts all unmethylated cytosines (C) to uracil (U); 5-methylcytosine (5-mC) residues are unaffected. The modified DNA is subsequently amplified with primers specific for methylated versus unmethylated DNA (Figure 4). This is achieved by incorporating CpG dinucleotides into the primer binding sites so that primers will maximally differentiate between bisulfite modified, methylated or unmethylated DNA. Gel electrophoresis is used to visualize amplification by one or other primer sets or indeed both sets (indicating methylation of one allele only). Quantitative MSP (qMSP) is a derivation of conventional MSP that utilizes a fluorescently labeled probe to quantify DNA methylation. CpG sites are also incorporated into the probe sequence to bias detection of hypermethylated template.

Figure 4. Differentiation of bisulfite generated polymorphisms using methylation-specific PCR. 
(Figure provided by Alexandra Tuzova.)

Methylation-sensitive high resolution melt (MS HRM) analysis: A specific stretch of methylated and unmethylated DNA will yield completely different sequences after bisulfite treatment, resulting in markedly different melting profiles of their amplified PCR products. Primers are designed to avoid any CpG dinucleotides in primer binding sites, enabling proportionate amplification of both methylated and unmethylated DNA. High resolution melt analysis of these parallel samples provides a closed-tube method of determining the methylation status of a DNA region of interest.

qPCR gene expression analysis of SFRP2

Previous published work by Dr Perry revealed that SFRP2, a Wnt signaling antagonist, is hypermethylated in approximately 65% of prostate tumors. Immunohistochemical analysis of prostate cancer tissue microarrays showed a strong inverse correlation between SFRP2 expression and tumor grade [6,7]. Researchers in the Prostate Molecular Oncology laboratory use IDT PrimeTime® qPCR Assays to measure expression levels of the SFRP2 assay id Hs.PT.56a.20705989 and genes (CCND1, MYC, and AXIN2) that are transcriptionally activated in response to nuclear β-catenin translocation in the canonical Wnt signaling pathway (Figure 5). Ongoing research by Dr Perry and her team is addressing the functional consequences of SFRP2 dysregulation in prostate cancer.

Figure 5. Analysis of Wnt signalling target genes in prostate cell lines. IDT probe-based PrimeTime qPCR Assays were used to measure expression levels of MYC, CCND1, and AXIN2 in 3 prostate cell lines: BPH1: benign, PC3: malignant, androgen independent, and 22Rv1: malignant androgen sensitive. Expression was normalized using ACTB and UBC housekeeping genes.  Similar levels of expression are observed for all 3 genes across benign and malignant states, apart from CCND1 which shows elevated expression in 22Rv1.

Hypermethylated gene involvement in prostate cancer

In a second line of research, the Prostate Molecular Oncology laboratory is developing prognostic molecular markers for use in a noninvasive test that will distinguish high-risk prostate cancer from insignificant tumors. They recover prostate cells from post-digital rectal examination urine samples (containing expressed prostatic secretions, or EPSs) by centrifugation. IDT primers and ZEN™ Double-Quenched Probes are then used for sensitive quantification of prostate cancer–specific DNA hypermethylation of a 6-gene panel in these cells. In addition to the cellular component, the scientists monitor cell-free nucleic acids for DNA methylation and expression of small non-coding RNAs. The IDT PrimerQuest® software (available at www.idtdna.com/scitools) is used to design methylation-specific assays—primers and probes that will hybridize specifically to bisulfite modified, methylated target regions, but that will not amplify unconverted genomic DNA or unmethylated DNA. qMSP primers and probes differ from standard qPCR oligonucleotides because the template to which they are designed is not genomic DNA, but rather bisulfite converted, 100% methylated DNA. In addition, primers and probes are designed to capture a maximum number of non CpG-cytosines (to bias amplification of bisulfite converted DNA) and are designed with at least two CpG sites per oligonucleotide, preferably at the 3’ ends of sequence. 

A panel of prostate cancer cell lines is also used to measure response to pharmacological demethylation. Using PrimeTime qPCR Assays, the researchers identify genes that are transcriptionally activated in response to DNA methyltransferase inhibition. This is important because it is a readily accessible method for identifying genes that are epigenetically regulated in prostate cancer.

Reagents facilitating this research

Dr Antoinette Perry describes her introduction to IDT. “I was ordering tons of primers from a major European supplier for a DNA methylation screening project, and it was getting ridiculously expensive,” notes Perry. So she asked colleagues in a neighboring neuropsychiatric laboratory from where they were getting their primers. They gave her the IDT web address. Now IDT products play a role in several of the Perry laboratory projects (Figure 1).

Small scale qPCR assays allow initial testing and optimization. The scientists used the PrimeTime qPCR Assay Library Selection Tool (www.idtdna.com/sciTools) to choose the assays for all of these experiments. qPCR is performed on Applied Biosystems 7500 and 7900HT Fast Real-Time PCR Systems, and gene expression is calculated using the comparative CT method.

“We switched to IDT PrimeTime qPCR Assays from TaqMan® Assays (Life Technologies) because the PrimeTime qPCR Assays work really well. They are much more cost efficient, and I really like how we can get them in different sizes so that when we are testing gene target assays we can get just a small scale (Mini Assays), at a lower cost, to see if it would work for us. That was really appealing to us as a customer,” notes Dr Perry. While the laboratory is currently using the assays in singleplex format, they plan to move to multiplex assays for some of their studies when they have better defined the performance of the assays and narrowed down the number of target genes to monitor.

Use of long ZEN Double-Quenched Probes to interrogate low complexity bisulfite converted DNA. The scientists in the Perry Lab were originally using MGB probes (Applied Biosystems) in their qPCR assays, but recently switched to IDT ZEN Double-Quenched Probes. “The ZEN Double-Quenched Probes are a really good fit for our methylation biomarker work for a number of reasons,” states Dr Perry. “Performing MS-HRM or any kind of bisulfite sequencing reaction results in sequences with reduced cytosine content, and thus lower Tm.  Thus, in order to design probes with a 10°C higher melting temperature than primer sequences, the probes used in these experiments need to be longer.” ZEN Double-Quenched Probes can be up to 40 nt long and still remain quenched due to the shorter proximity of the ZEN quencher to the reporter dye. This makes ZEN probes a great choice for these types of assays as the Tm of these longer probes can be kept high,” notes Perry.

ZEN Double-Quenched Probes also offer an advantage for qMSP assays. The longer probe length allows incorporation of a maximum number of CpG sites, thus enabling the researcher to interrogate the methylation status of multiple CpG sites at the same time

Creating qPCR assay standard curves. A previous DECODED article, Easily-Designed Standard Curves for qPCR [8], provided the incentive for using IDT gBlocks® Gene Fragments as standards in their qPCR assays. The laboratory used gBlocks fragments to assemble constructs containing several different target genes that the researchers are interested in quantifying both for methylation and gene expression. They also created constructs with the full sequence of their targets, which they serially diluted to create standard curves.

Easy generation of mutant transcripts. gBlocks Gene Fragments were also used in Gibson Assembly® reactions [9] to construct the cDNA of a Wnt signaling pathway gene. Additional gBlocks constructs were designed to represent different mutants with deletions in this same gene. These were cloned into plasmids and transfected into prostate cancer cell lines DU145 and 22Rv1 cells to investigate the effects of overexpressing these mutants in wild-type cells and to look at functional effects on the cells such as proliferation and apoptosis. Dr Perry confirmed, “The gBlocks Gene Fragments constructs worked! And we were very happy with this approach.”

Methylation analysis primer design tips

The following recommendations were provided by researchers in the Perry lab based on their experience with methylation studies to identify epigenetic markers for prostate cancer. See Perry et al (2013) [6] and Patterson et al (2011) [10] for additional discussion on primer and probe design for methylation analysis.

      Primer design tips for quantitative methylation specific PCR (qMSP)

  • Design amplicon lengths between 50 and 150 bp.
  • Design primers to meet standard parameters for primer design; i.e., avoiding secondary structure and primer dimer formation.
  • Select probes with melting temperatures 10°C higher than that of primers (58–60°C).
  • Avoid G residues at the 5’ end of the probe; a G residue adjacent to the reporter dye will quench the reporter fluorescence even after cleavage.
  • Include at least 2 CpG sites within each primer, with at least 1 CpG dinucleotide at the 3’ end of each primer to bias amplification toward bisulfite-modified, hypermethylated DNA.
  • Incorporate the maximum number of non-CpG cytosine nucleotides into the primer and probe oligonucleotides to bias amplification toward completely modified DNA.

      Primer design tips for methylation-sensitive high resolution melt analysis (MS HRM)

  • Design primers to meet standard parameters for primer design; i.e., avoiding secondary structure and primer dimer formation.
  • Avoid including any CpG dinucleotides within oligo primers, to prevent discrimination against templates of different methylation states during the amplification step. However, 1–2 CpG sites can be incorporated at the 5’ end (to avoid PCR bias of unmethylated templates).
  • Match the melting temperatures of primers, preferably within 1°C.
  • Include several non-CpG cytosine nucleotides in each primer, to favor amplification of fully bisulfite-modified DNA.
  • Select an amplicon length <300 bp to reduce complexity of the melting profile.
  • Consider the number of CpG sites within the amplicon as each CpG site represents a potential synthetic SNP following bisulfite modification—cytosine will be PCR-amplified as thymine, whereas 5-methyl-cytosine will be PCR-amplified as cytosine. Thus, the greater the number of CpG dinucleotides within an amplicon, the greater the number of potential synthetic SNP sites introduced, resulting in a larger difference in melting temperature. Therefore, this assay is useful for capturing a “methylation snapshot” of a genomic region. If more site-specific methylation information is required, primers should be designed to capture fewer CpG sites, or alternative methodologies such as bisulfite sequencing or pyrosequencing may be more appropriate.


Administering treatment only when needed

Prostate cancer is currently considered the most common non-cutaneous malignancy in men in the Western world. However clinicians are almost too good at detecting it, resulting in positive tests that often lead to radical treatment for even indolent forms of the disease. Research by the Perry laboratory will help meet a need to identify aggressive tumors at an early stage while they are potentially curable, and to distinguish them from indolent, low-grade tumors, which could be managed with proactive surveillance, thus avoiding overtreatment of clinically insignificant disease.


  1. Hayatsu H, Wataya Y, et al. (1970) Reaction of sodium bisulfite with uracil, cytosine, and their derivatives. Biochem, 9:2858–2865.
  2. Frommer M, McDonald LE, et al. (1992) A genomic sequencing protocol that yields a positive display of 5-methylcytosine residues in individual DNA strands. Proc Natl Acad Sci USA, 89:1827–1831. First demonstrated the utility of bisulfite conversion in sequencing of 5-methylcytosine.
  3. Wang RY-H, Gehrke CW, Ehrlich M. (1980) Comparison of bisulfite modification of 5-methyldeoxycytidine and deoxycytidine residues. Nucl Acids Res, 8:4777–4790.
  4. Shapiro R, Braverman B, et al. (1973) Nucleic acid reactivity and conformation. II. Reaction of cytosine and uracil with sodium bisulfite.  J Biol Chem, 248:4060–4064.
  5. Clark S, Harrison J, et al. (1994) High sensitivity mapping of methylated cytosines. Nucleic Acids Res. 22(15):2990–2997.
  6. Perry AS, O'Hurley G, et al. (2013) Gene expression and epigenetic discovery screen reveal methylation of SFRP2 in prostate cancer. Int J Cancer, 132:1771–1780.
  7. O'Hurley G, Perry AS, et al. (2011) The role of secreted frizzled-related protein 2 expression in prostate cancer. Histopath, 59:1240–1248.
  8. Packer H. (2013)Easily-Designed Standard Curves for qPCR. DECODED 3.3:12–13.
  9. Packer H. (2012)Isothermal Assembly: Quick, Easy Gene Construction. DECODED 2.1: 12–13.
  10. Patterson K, Molloy L, et al. (2011) DNA Methylation: Bisulphite Modification and Analysis. J Vis Exp, 56:3170.


Researcher profile

Dr Antoinette Perry is a Senior Research Fellow at the Institute of Molecular Medicine, Trinity College, Dublin, Ireland, where she received her BA and PhD degrees. Dr Perry has won several awards, including a 2012 Movember Research GAP1 Award and the 2011 Richard B. Handler – PCF Young Investigator Award, for her research on prostate cancer epigenetics. Her undergraduate degree in human genetics got her interested in using genetics and molecular biology to understand human disease, and specifically cancer biology. Her PhD research provided an opportunity to study the role of epigenetics in cancer of the prostate.

A. Dr Perry.                                     B. Perry Laboratory.

Figure 6. Researchers studying prostate cancer epigenetics. (A)
Dr Antoinette Perry, and (B), from left to right: Liam DeBarra, Niamh McDermott, Dr Eva Bolton, Colm O’Rourke, Dr Armelle Meunier, Dr Laure Marignol, Dr Antoinette Perry, Dr Darragh O’Donovan, Alexandra Tuzova, Dr Anna Walsh.

Product focus—PrimeTime® qPCR Assays and ZEN™ Double-Quenched Probes

PrimeTime qPCR 5’ Nuclease Assays consist of a forward primer, a reverse primer, and a labeled probe, all delivered in a single tube. PrimeTime qPCR Assays come in 3 different sizes (Mini-100 rxns, Std-500 rxns, XL-2500 rxns) and 5 different dye–quencher combinations. Assays are available predesigned for human, mouse, and rat transcriptomes. PrimeTime Predesigned qPCR Assays are prepared when ordered using up-to-date sequence information from NCBI, and are guaranteed to be at least 90% efficient when used with a commercially available master mix and measured over 4 orders of magnitude. Custom assays can also be designed for other species.

PrimeTime qPCR Primer Assays are ideal for SYBR® Green or other intercalating dye assays, where no probe is needed. These predesigned primer pairs are identical to those in PrimeTime qPCR 5’ Nuclease Assays.

ZEN Double-Quenched Probes make use of a second, internal “ZEN” quencher in addition to a 3’ terminal Iowa Black Fluorescent Quencher (IBFQ) to significantly decrease fluorescent background and increase endpoint signal, reducing Cqvalues. The reduction in background fluorescence also improves assay precision. Even probes as long as 40 nt stay quenched due to proximity of the internal ZEN modification to the reporter dye.

Learn more about PrimeTime qPCR Assays and ZEN Double-Quenched Probes at www.idtdna.com/primetime.

Product focus—gBlocks® Gene Fragments

gBlocks® Gene Fragments are double-stranded, sequence-verified genomic blocks from 125 to 750 bp in length that can be shipped in 4–7 working days for affordable and easy gene construction or modification. gBlocks fragments are synthesized using the same industry-leading, high fidelity synthesis chemistries developed by IDT for Ultramer® Oligonucleotides, and are sequence verified prior to shipping. Using the Gibson Isothermal Assembly® method, 4 gBlocks fragments can be assembled into a 3 kb gene in less than 1 hour; a simple, 30 nt sequence overlap is required when designing the gene fragments.

Learn more about gBlocks Gene Fragments at www.idtdna.com/gblocks.

Additional reading

Improve probe-based qPCR experiments—Webinar summary: Learn about the benefits of our PrimeTime® Gene Expression Master Mix for qPCR experiments. The presentation covers singleplex and multiplex experiments, online tools for planning qPCR experiments, and a discussion of the excellent thermal stability of the master mix.

DNA methylation analysis—keeping it simple—Research profile: Use of methylation-sensitive restriction enzymes and probe-based PCR to provide methylation percentage for specific amplicon regions (primarily promoters). Read how IDT ZEN Double-Quenched Probes, PrimeTime qPCR Assays, and gBlocks Gene Fragments augment this analysis.

Melt curve analysis for improved intercalating dye qPCR—Listen to this discussion of the benefits and limitations of melt-curve analysis using clear example—presented as a webinar. Read how PrimeTime Predesigned qPCR Primer Assays are designed to be compatible with intercalating dyes, and can also be transitioned to probe-based assays.

Review other DECODED Online newsletter articles on PCR and qPCR applications.

You can also browse our DECODED Online newsletter for additional application reviews, lab tips, and citation summaries to facilitate your research.

Author: Ellen Prediger, PhD, is the Director of Scientific Communication at IDT.

© 2014, 2017 Integrated DNA Technologies. All rights reserved. Trademarks contained herein are the property of Integrated DNA Technologies, Inc. or their respective owners. For specific trademark and licensing information, see www.idtdna.com/trademarks.

Predesigned qPCR Assays

Probe-based qPCR assays for quantification of human, mouse, and rat gene expression. Order in plates or tubes.

Search human, mouse, or rat genes ≫

Related Articles

Designing PCR Primers and Probes

General guidelines for designing primers and probes and for choosing target locations for PCR amplification.

Read more ≫

Steps for a Successful qPCR Experiment

Considerations for 5′ nuclease assay design and experimental setup to help you obtain accurate and consistent results.

Read more ≫

Interpreting Melt Curves: An Indicator, Not a Diagnosis

Examining PCR melt curve data to determine what it can/cannot tell us about resulting PCR amplicons.

Read more ≫

Epigenetic Biomarkers for Prostate Cancer

Scientists use methylation and expression analysis methods to evaluate epigenetic markers for early, noninvasive detection of aggressive prostate cancer. IDT PrimeTime® qPCR Assays, ZEN™ Double-Quenched Probes, and gBlocks® Gene Fragments facilitate this research.

Read more ≫

Optimizing Multiplex qPCR for Detecting Infectious Diseases and Biothreat Agents in the Field—ZEN™ Double-Quenched Probes bring down the background

Tetracore researchers developing large sets of robust probe-based qPCR assays discuss the need to: use probe dyes compatible on common PCR instruments, maintain low background with multiple probes, and reformulate assays to address viral mutation.

Read more ≫