PCR and qPCR
Support and Educational Content

Improved PCR genotyping—obtain greater precision with RNase H2 activation of assay primers

rhAmp™ SNP Genotyping

Challenges of PCR-based genotyping

Identifying and characterizing single nucleotide polymorphisms (SNPs) is important for many applications, including the study of gene function, identification of specific species or individuals, diagnosis of disease caused by gene variation, and targeted medical intervention based on specific genotypes. 5′-nuclease PCR assays are a fundamental technology for genotyping, because they allow labs to inexpensively, yet accurately, determine genotype using high-throughput processing and low sample input.

Another advantage of PCR methods is that they provide highly robust amplification of specific target sequences. However, non-specific amplification can also occur when reaction conditions are not optimal or when primers recognize sequences that are similar to the desired target.

For some PCR applications, obtaining a majority of correct amplification product is sufficient. However, for 5′-nuclease genotyping applications, non-specific amplification and primer-dimers can reduce peak signal levels for assays, leading to difficult data interpretation or even unusable data.

Reduction of off-target amplification with rhPCR

To increase target specificity in PCR-based applications, IDT scientists developed RNase H2–dependent PCR (rhPCR). rhPCR relies on an RNase H2 enzyme from Pyrococcus abyssi that removes RNA bases from a DNA duplex, only when the RNA bases are paired to their correct DNA complement. Importantly, cleavage by RNase H2 leaves an intact, 3′ hydroxyl group that can be used for extension by a DNA polymerase (Figure 1).

Figure 1. RNase H2 cleavage produces a 3′-hydroxyl group for extension by a novel Taq DNA polymerase that is optimized for SNP genotyping. RNase H2 cleaves the phosphate backbone between DNA and RNA bases under normal PCR cycling conditions. The cleavage reaction leaves a 3′-hydroxyl group on the DNA base that is accessible for DNA polymerase extension.

The P. abyssi RNase H2 functions optimally in conditions that are compatible with thermophilic DNA polymerases, including Taq polymerase. This led the founder of IDT, Dr Joseph Walder, and a team of researchers to develop a novel method for reducing off-target amplification in PCR. The research included development of rhPCR primers that contain a single RNA base close to the 3′ end of each primer and a 3′ modification that blocks extension. During a normal PCR cycle, the RNase H2 enzyme removes the RNA base and blocking group from the primer end, only when the primer has bound the correct target, thus allowing for extension (Figure 2). IDT researchers have also extensively tested which position is optimal for the placement of the RNA base [1].

Figure 2. Novel rhPCR method employs RNase H2 to increase amplification specificity. Use of RNase H2 to incorporate a specificity check into the PCR primers dramatically reduces non-specific amplification and primer-dimer artifacts, even in highly multiplexed reactions (Figure 3). This method forms the core of the rhAmp SNP Genotyping System, and the resulting impressive performance has implications for many PCR-based applications.

Figure 3. rhPCR primers virtually eliminate primer-dimers and nonspecific amplification artifacts in multiplex PCR. In multiplex PCR amplification of 96 targets from human genomic DNA (NA12878, Coriell Institute), a set of multiplex primers for the 96 assays (192 individual primers) was synthesized as standard PCR primers and as RNase H2-activated, rhAmp primer pairs. The results of the assays that used rhAmp primer pairs show tight control of primer-dimer artifacts, even in these highly multiplexed assays compared with the standard PCR primer reactions. Total reaction volumes (50 µL) included 10 ng genomic DNA template or no template (no template controls, NTC). RNase H2 was present in all reactions, but had no functional role in PCRs with standard primers.

The rhAmp Genotyping System

The rhAmp SNP Genotyping System uses the rhPCR primer technology as described above for SNP-specific assay primers and a locus-specific reverse primer. To further enhance the method, rhAmp SNP Genotyping includes several other technologies to create a highly precise genotyping solution. The system adds an optimized reporter mix containing universal probes for the reference and alternate alleles in the 5′-prime nuclease PCR assays. The forward primers in the rhAmp SNP Genotyping Assay also add a tail sequence to each amplicon that is recognized by the universal reporter system. Importantly, the probes recognize the complement of the primer tail, which is created during amplification. This means that the probes cannot interact with the assay primers directly (Figure 4).

Figure 4. Steps for a rhAmp SNP Genotyping PCR cycle. There are multiple advantages to using a universal reporter. The first advantage is cost. The most expensive component of other genotyping assays is the gene-specific, fluorescently-labeled probe. Another advantage is that the rhAmp Genotyping System assays can be designed with amplicons as short as 40 bp, because the probe does not need to bind between the 2 assay primers. This creates possibilities that are not available with larger amplicons in challenging genomic regions. Finally, the 2 universal reporter probes are highly optimized for universal cycling conditions, which means you don’t have to worry about optimizing different conditions for each assay, eliminating a significant issue for high-throughput applications.

Genotyping-optimized Taq polymerase

The rhAmp Genotyping System also requires the use of the rhAmp Genotyping Master Mix. In addition to the RNase H2 enzyme previously described, this mix contains a novel Taq DNA polymerase that outperforms other polymerases in SNP genotyping assays (Figure 5). Wild-type Taq polymerase is sensitive to mismatches at the 3′ base of PCR primers, but it will still amplify from some incorrectly annealed primers. Even a very small number of incorrect priming extensions by Taq creates new erroneous template that can be further amplified. If enough wrong template is created and amplified, the competing degradation of the probe for an allele that is not present in the sample can cause significant convolution of correct and incorrect fluorescent signals. This is visible as a decrease in the cluster angle-of-separation for the genotypes in the resulting allelic discrimination plots (Figure 5B). The mutant Taq polymerase in the rhAmp Genotyping Master Mix is much more sensitive to allelic mismatches at the 3′ base of the primer, resulting in improved genotyping performance (Figure 5A).

Figure 5. A novel genotyping Taq DNA polymerase provides superior allelic discrimination. rhAmp Genotyping Master Mixes, formulated with (A) a novel Taq DNA polymerase developed by IDT or (B) wild type Taq DNA polymerase were compared using a rhAmp SNP assay (rs2269829), targeting an intronic SNP in PON1 and 3 ng of gDNA samples from 46 individuals (Coriell Institute). Analysis was performed using the QuantStudio™ 7 Flex Real-Time PCR System software (Thermo Fisher). With improved selectivity at the SNP site, the rhAmp Genotyping Master Mix containing the IDT Taq DNA polymerase results in lower off-target signal and greater cluster angle separation.

Complete rhAmp SNP Genotyping System

The rhAmp SNP Genotyping chemistry is only compatible with rhAmp SNP Assays. The current rhAmp SNP Assay database for human SNPs is very large, with >10 million designs available. There is also a selection of assays that have been further validated in the lab for SNPs involved in the absorption, distribution, secretion, and excretion (ADME) of pharmaceutical compounds. If you are working in other species, including plant species, you can easily design assays using the custom rhAmp Genotyping Design Tool.

You can also easily design gBlocks® Gene Fragment controls during the ordering process. For SNPs in challenging sequence regions, using such controls can help data analysis software separate genotypes and, in some cases, prevent loss of data.


  1. Dobosy JR, Rose SD, et al. (2011) RNase H-dependent PCR (rhPCR): improved specificity and single nucleotide polymorphism detection using blocked cleavable primers. BMC Biotechnol, 11:80.

Product focus—tools for genotyping

rhAmp™ SNP Genotyping System

Improve the precision of your PCR-based SNP genotyping with rhAmp SNP Genotyping technology. This technology uses a unique two-enzyme system coupled with RNA-DNA hybrid primers to precisely interrogate target SNPs. Combined with IDT universal reporter chemistry, the rhAmp SNP Genotyping System offers a simple, high performance genotyping solution at an affordable price.

  • Generate the highest level of performance with greater than 99.5% call accuracy for more than 90% of assays tested.
  • Interrogate SNPs in difficult sequence regions with amplicons sizes as small as 40 bp.
  • Validate markers affordably using the smallest pack size commercially available.
  • Ensure confidence in your data with gBlocks® Gene Fragments as control templates.

The rhAmp SNP portfolio includes all components needed to successfully generate high quality genotyping data on any commonly available real-time PCR instrument.

Learn more about the rhAmp SNP Genotyping System »


LNA PrimeTime® Probes

LNA PrimeTime Probes are dual-labeled DNA probes designed for use in 5′ nuclease assays. LNA-modified bases enable use of shorter probes with higher melting temperatures compared to probes with unmodified DNA bases. They are commonly used for custom applications such as transcript variant detection or research in microbial species.

Learn more about LNA PrimeTime Probes »


MGB Eclipse® Probes

MGB Eclipse Probes and companion primers are available for use in human, in vitro diagnostic applications. These are 5′ nuclease assays that incorporate probes containing a minor groove binder. These primers and probes are produced using our ISO 13485 certified production process for use as components in clinical diagnostic tests.

Learn more about MGB Eclipse Probes »

Additional reading

rhPCR SNP genotyping method provides confidence calls with >99.5% accuracy—Use this simple, single-tube genotyping platform to get >99.5% call accuracy. The method is based on RNase H2–dependent PCR technology and uses RNA-DNA hybrid primers, blocked at the 3′ end, that prevent primer-dimer artifacts and non-specific amplification.

Improve the specificity of SNP genotyping—Webinar summary: This novel, simple genotyping method uses blocked, cleavable primers and RNase H2 to prevent off-target and primer-dimer interactions. Learn how these single-tube reactions, easily run in high-throughput mode, can improve the accuracy and sensitivity of your genotyping experiments.

Review other DECODED Online newsletter articles on PCR and qPCR applications.

You can also browse our DECODED Online newsletter for additional application reviews, lab tips, and citation summaries to facilitate your research.

Author: Hans Packer, PhD, is a scientific writer at IDT.

© 2017 Integrated DNA Technologies. All rights reserved. Trademarks contained herein are the property of Integrated DNA Technologies, Inc. or their respective owners. Yakima Yellow and MGB Eclipse are registered trademarks of Elitech Group. For specific trademark and licensing information, see www.idtdna.com/trademarks.

Predesigned qPCR Assays

Probe-based qPCR assays for quantification of human, mouse, and rat gene expression. Order in plates or tubes.

Search human, mouse, or rat genes ≫

Related Articles

Designing PCR Primers and Probes

General guidelines for designing primers and probes and for choosing target locations for PCR amplification.

Read more ≫

Steps for a Successful qPCR Experiment

Considerations for 5′ nuclease assay design and experimental setup to help you obtain accurate and consistent results.

Read more ≫

Interpreting Melt Curves: An Indicator, Not a Diagnosis

Examining PCR melt curve data to determine what it can/cannot tell us about resulting PCR amplicons.

Read more ≫

Epigenetic Biomarkers for Prostate Cancer

Scientists use methylation and expression analysis methods to evaluate epigenetic markers for early, noninvasive detection of aggressive prostate cancer. IDT PrimeTime® qPCR Assays, ZEN™ Double-Quenched Probes, and gBlocks® Gene Fragments facilitate this research.

Read more ≫

Optimizing Multiplex qPCR for Detecting Infectious Diseases and Biothreat Agents in the Field—ZEN™ Double-Quenched Probes bring down the background

Tetracore researchers developing large sets of robust probe-based qPCR assays discuss the need to: use probe dyes compatible on common PCR instruments, maintain low background with multiple probes, and reformulate assays to address viral mutation.

Read more ≫